Kimball Midwest Blog

The Wheels on the Bus get Maintained in the Garage

October 23, 2018 | by Kimball Midwest

According to the National Highway Traffic Safety Administration (NHTSA), about 480,000 yellow school buses around the country transport more than 25 million students to and from school every day. Therefore, school bus safety is a priority year-round, even when school is not in session.

Tags: Safety, Maintenance, Vehicle

Do it Yourself: In-House Hydraulic Assemblies

October 15, 2018 | by Kimball Midwest

When it comes to producing hydraulic hose assemblies in-house, you need to be sure you’re covering all your bases to avoid downtime, or even worse – injury.

Tags: Hydraulic Hose, Hydraulic Systems, Hydraulics, How To

Are you Prepared for the Worst?

October 8, 2018 | by Kimball Midwest

Although the number of people dying in fires in the United States has trended down in recent decades, it’s still a significant cause of death with more than 3,500 fire deaths reported in 2016, according to the U.S. Fire Administration.

Tags: Prevention, Fire, Preparation

Demonstrating the Value of Superior Products

October 1, 2018 | by Kimball Midwest

Think about how many tools you’ve used that have failed or broken in the middle of a job. If you didn’t already have a replacement on hand, you may have had to run out and buy a new one. In some cases, a broken tool could potentially ruin your work piece. Poor quality tooling affects your bottom line. It requires frequent replacing and interrupts your work, costing you time and money.

Tags: Quality, Commitment, Service

What are you Cutting With?

September 27, 2018 | by Kimball Midwest

Cutting tools are essential to your repair and maintenance arsenal, whether you’re a professional or amateur. There’s a cutting tool for every project, but the range of tools available can be overwhelming. What kind of drill bit do you need, and which length is most appropriate? Which saw is best for cutting metal? When is a hole cutter a better option than a drill bit? Having a little knowledge of cutting tools is critical for choosing the best tool for the job.

Tags: Cutting Tools, Tips, Drill Bits

How to Remove a Stuck Fastener

September 17, 2018 | by Kimball Midwest

You’re working on a job that has a tight deadline. Wait, isn’t that every job? You hit the most annoying roadblock of all – a stuck fastener. A stuck nut or bolt can hinder your job in more ways than one.

Tags: Fasteners, How To, Cutting Tools

The Cryogenic Process and its Value

September 4, 2018 | by Kimball Midwest

First commercialized in the 1960s, the cryogenic process has had a major impact by offering exceptional benefits to metal parts that are used in a wide range of industries.

Tags: Quality, Cutting Tools, Products

Why Should You Care About Quality?

August 27, 2018 | by Kimball Midwest

Have you ever bought a cheap product or worked with a company that was offering inexpensive services only to have it come back to bite you?

Tags: Products, Quality, Commitment

Mixing and Matching Your Hydraulic Components?

August 20, 2018 | by Kimball Midwest

We’re back with another installment of our Ask the Expert series. This time, we’re addressing the importance of using the same manufacturer for all components of a hydraulic hose assembly.

Tags: Hydraulic Hose, Liability, Hydraulic Systems

Effective Extractors and When to Use Them

August 13, 2018 | by Kimball Midwest

It’s probably happened to you at some point, whether you’re a DIYer or you work in repair and maintenance. You stripped or broke a screw or bolt, and it refuses to budge. Broken fasteners are not just frustrating, they can ruin your work material, and your day, if you don’t have a good extractor to remove them.

Tags: Extractors, Cutting Tools, Bolts

Are You Maintaining Your Hydraulic System?

August 6, 2018 | by Kimball Midwest

The pure power generated by a hydraulic system is a wonderful thing, but it takes an intricate mixture of proper assembly, maintenance, and proper usage to enjoy its full potential.

Tags: Hydraulics, Hydraulic Systems, How To, Hydraulic Hose

Making Sense of Auto Fuses

July 30, 2018 | by Kimball Midwest

Despite its small size, an auto fuse is a critical component in your vehicle, protecting the valuable and delicate electronics in the event of a sudden electrical surge. Fuses are designed to melt if exposed to an overcurrent—interrupting the circuit before it causes more significant damage—but they are generally easy and inexpensive to replace.

Tags: Fuse, Electrical, Automotive

Previous All posts Next