Kimball Midwest Blog (30)

Is Your Air Brake System DOT Compliant?

October 20, 2017 | by Kimball Midwest

The U.S. Department of Transportation (DOT) holds a high standard for over-the-road vehicles using air brake systems. Heavy-duty vehicles that travel on the roadways, such as semi tractors and trailers and buses, require DOT-approved air brake systems, and each component of air brake systems must comply with DOT standards. Other heavy-duty vehicles, like agricultural and off-road equipment, that use air brakes may not require DOT approval.

Tags: Safety, DOT, Fleet

The Do's and Don'ts of Cutting Tools

October 13, 2017 | by Kimball Midwest

You may have heard the phrase, "a little knowledge is a dangerous thing." If you work closely with cutting tools, you may think using the tool is simple as picking a drill bit, chucking it up, and going to work. But what if you think familiarity means you can skip best practices? Our goal is to provide knowledge to keep you safe as you use cutting tools. While the following do’s and don’ts may seem like common sense, most accidents happen when we do things we know we shouldn’t do.

Tags: How To, Cutting Tools, Drilling

How to Prevent Falls in your Workplace

September 22, 2017 | by Kimball Midwest

Did you know that falls are the leading cause of death in the workplace? While your employer should be taking the necessary steps to ensure your safety, there are also things you can do to make sure you avoid falls.

Tags: Safety, How To, Preparation

6 Ways to Break Down the World of Abrasives

September 14, 2017 | by Kimball Midwest

Jobs that require abrasives in your shop may seem overwhelming. There are so many abrasive products that you can choose from, and you don’t want to ruin the material you’re working on. So how do you know which abrasive to pick?

Tags: Products, Safety, Abrasives

5 Ways to Efficiently Organize Your Shop

September 5, 2017 | by Kimball Midwest

How many times a week do you search your shop for a part that you know you have? How often are you running to the store to buy a tool that you’ve deemed lost? A disorganized shop can be the cause of frustration, wasted time, and lost money.

It’s time to clean up your shop and create a productive environment. Follow these tips to find out how:

Tags: Organization, How To, Shop Supplies

How a Fastening System Works

August 31, 2017 | by Kimball Midwest

Cap screws, nuts, and washers hold together everything we use. From the desk you work at to the car you drive, these fasteners are in use. Well, fasten up, because we’re going to take a closer look at the world of fasteners.

Tags: Products, Maintenance, Fasteners

Welcome to the Kimball Midwest Blog

August 22, 2017 | by Kimball Midwest

We're here to make your life easier. We've been in the business since 1923, so we have a lot of MRO knowledge we want to share with you. There are over 800 Kimball Midwest Reps spread across the US gathering knowledge and solutions. This is the information you'll find on the Kimball Midwest blog.

Tags: Culture, Service, MRO

Previous All posts