A Quick History of Cutting Tools

    October 18, 2019 | by Kimball Midwest

    One day, shortly after fire was harnessed and became a useful tool, a caveman decided trees were necessary to make more fire. After all, you can’t have fire without fuel. After trying to push the tree down, he picked up a stone and tried to knock the tree down with that. (Editor’s note: We’re just assuming here.)

    Tags: Cutting Tools, Education, History

    Avoid the Bur-dens of Brittle, Broken Burs

    October 1, 2019 | by Kimball Midwest

    Not all carbide burs are created equal. Some are simply better than others. Kimball Midwest’s Bur-Maxx Tungsten Carbide bur may just be the best bur we’ve ever made.

    Tags: Cutting Tools, Best Tools for the Job, Demonstrations, Bur, Debur

    Rethink How You Cut Holes in Steel

    September 24, 2019 | by Kimball Midwest

    Cutting holes in plate steel is by no means a simple task. You could use a drill bit, but why work harder and take more time to get the job done? Coventional hole saws work, too, but they wear out quickly.

    Tags: Cutting Tools, Tips, Quality Products, Demonstrations

    Showing the Value of Drill Bits

    September 17, 2019 | by Kimball Midwest

    You might think drill bits are a simple commodity, with one being just like any other. That’s simply not the case.

    Tags: Cutting Tools, Drill Bits, Best Tools for the Job, Made in America, Demonstrations

    Efficiency Matters to Your Bottom Line

    September 12, 2019 | by Kimball Midwest

    When it comes to your bottom line, efficiency matters. For that, you need an organized space to make it easy to find what you need and tools made to last longer and perform better. An efficient use of space, reduced inventory footprint and high-quality tools reduce your downtime and your maintenance, repair and operations costs.

    Tags: Cutting Tools, Vendor Managed Inventory, Specialty Abrasives, KM USA, Fastener, Efficiency

    Gear to go With Your Cutting Tools

    September 3, 2019 | by Kimball Midwest

    So you’ve picked out the right cutting tool for the job? That’s great, but before you get started, don’t neglect a few key categories of things you’ll need to get the job done right: cutting tool fluids, safety equipment and deburring tools.

    Tags: Maintenance, How To, Cutting Tools, Prevention, Chemicals

    How to Remove a Stuck Fastener

    August 20, 2019 | by Kimball Midwest

    You’re working on a job that has a tight deadline. Wait, isn’t that every job? You hit the most annoying roadblock of all – a stuck fastener. A stuck nut or bolt can hinder your job in more ways than one.
    Tags: How To, Fasteners, Cutting Tools

    What are you Cutting With?

    September 27, 2018 | by Kimball Midwest

    Cutting tools are essential to your repair and maintenance arsenal, whether you’re a professional or amateur. There’s a cutting tool for every project, but the range of tools available can be overwhelming. What kind of drill bit do you need, and which length is most appropriate? Which saw is best for cutting metal? When is a hole cutter a better option than a drill bit? Having a little knowledge of cutting tools is critical for choosing the best tool for the job.
    Tags: Cutting Tools, Tips, Drill Bits

    The Cryogenic Process and its Value

    September 4, 2018 | by Kimball Midwest

    First commercialized in the 1960s, the cryogenic process has had a major impact by offering exceptional benefits to metal parts that are used in a wide range of industries.
    Tags: Products, Cutting Tools, Quality

    Effective Extractors and When to Use Them

    August 13, 2018 | by Kimball Midwest

    It’s probably happened to you at some point, whether you’re a DIYer or you work in repair and maintenance. You stripped or broke a screw or bolt, and it refuses to budge. Broken fasteners are not just frustrating, they can ruin your work material, and your day, if you don’t have a good extractor to remove them.
    Tags: Cutting Tools, Extractors, Bolts

    Ask The Expert: Drill Bits, Abrasives, and Cutting Tools

    April 27, 2018 | by Kimball Midwest

    When it comes to questions on a job, who do you turn to?

    Tags: Abrasives, Cutting Tools, Drilling

    The Do's and Don'ts of Cutting Tools

    October 13, 2017 | by Kimball Midwest

    You may have heard the phrase, "a little knowledge is a dangerous thing." If you work closely with cutting tools, you may think using the tool is simple as picking a drill bit, chucking it up, and going to work. But what if you think familiarity means you can skip best practices? Our goal is to provide knowledge to keep you safe as you use cutting tools. While the following do’s and don’ts may seem like common sense, most accidents happen when we do things we know we shouldn’t do. 
    Tags: How To, Cutting Tools, Drilling
    All posts

    Stay Connected

     
    Facebook
    LinkedIn
    Twitter
    Instagram
    YouTube
    Blog
    		  

    Sitemap | Privacy Policy | Terms & Conditions
    Copyright © 2023 Kimball Midwest