Kimball Midwest Blog | Kimball Midwest (25)

Kimball Midwest

We have been in business since 1923, serving our customers through both superior products and superior services. We are a major force in the industrial maintenance aftermarket with unlimited growth potential. We service our Sales Representatives and end-use customers from our corporate office and distribution center in Columbus, Ohio and from our distribution centers strategically located in Dallas, Texas; Reno, Nevada; and Savannah, Georgia.

Recent Posts

How to Thin Our Oil-Based Paint

November 26, 2018 | by Kimball Midwest

Kimball Midwest’s line of Ultra Pro-Max Paint is formulated to be a direct-to-metal finish or can be used with a primer. This paint can be applied by brush, roller or sprayer. It’s designed to provide better coverage than standard paints and is available in gallon cans or spray cans.

Tags: How To, Paint, oil-based paint, Quality Products

Electrical Chemicals

November 14, 2018 | by Kimball Midwest

Chemicals for Your Electronics

It’s such a frequent problem in vehicles, it’s practically a cliché. It usually happens in winter, but the moment can strike anytime, ruining your day.

You turn the key and … nothing. Nothing happens other than a series of clicking sounds.

You’ve got an electrical problem, and your vehicle isn’t going anywhere until it’s solved.

Tags: Products, Safety, Preparation, Electrical, Chemicals, Insulation, weather-proof

National IPA Makes MRO Procurement Process Easier

November 7, 2018 | by Kimball Midwest

If you’re responsible for buying maintenance, repair and operations (MRO) supplies for a local, state or nonprofit entity, you know procurement can often be a frustrating and time-consuming process. While procurement processes may vary by agency, they often include the following steps:

Tags: MRO, Local, non-profit, 501(c), municipality, state, OMNIA, government

The Right Part When You Need It

November 1, 2018 | by Kimball Midwest

In the maintenance, repair and operations (MRO) world, having the right part when and where you need it is vital. You simply can’t afford to have your work grind to a halt because of a single missing piece of the puzzle.

Tags: Organization, Service, Delivery, Shipping, Vendor Managed Inventory

The Wheels on the Bus get Maintained in the Garage

October 23, 2018 | by Kimball Midwest

According to the National Highway Traffic Safety Administration (NHTSA), about 480,000 yellow school buses around the country transport more than 25 million students to and from school every day. Therefore, school bus safety is a priority year-round, even when school is not in session.

Tags: Safety, Maintenance, Vehicle

Do it Yourself: In-House Hydraulic Assemblies

October 15, 2018 | by Kimball Midwest

When it comes to producing hydraulic hose assemblies in-house, you need to be sure you’re covering all your bases to avoid downtime, or even worse – injury.

Tags: Hydraulics, How To, Hydraulic Systems, Hydraulic Hose

Are you Prepared for the Worst?

October 8, 2018 | by Kimball Midwest

Although the number of people dying in fires in the United States has trended down in recent decades, it’s still a significant cause of death with more than 3,500 fire deaths reported in 2016, according to the U.S. Fire Administration.

Tags: Preparation, Prevention, Fire

Demonstrating the Value of Superior Products

October 1, 2018 | by Kimball Midwest

Think about how many tools you’ve used that have failed or broken in the middle of a job. If you didn’t already have a replacement on hand, you may have had to run out and buy a new one. In some cases, a broken tool could potentially ruin your work piece. Poor quality tooling affects your bottom line. It requires frequent replacing and interrupts your work, costing you time and money.

Tags: Service, Quality, Commitment

What are you Cutting With?

September 27, 2018 | by Kimball Midwest

Cutting tools are essential to your repair and maintenance arsenal, whether you’re a professional or amateur. There’s a cutting tool for every project, but the range of tools available can be overwhelming. What kind of drill bit do you need, and which length is most appropriate? Which saw is best for cutting metal? When is a hole cutter a better option than a drill bit? Having a little knowledge of cutting tools is critical for choosing the best tool for the job.

Tags: Cutting Tools, Tips, Drill Bits

The Cryogenic Process and its Value

September 4, 2018 | by Kimball Midwest

First commercialized in the 1960s, the cryogenic process has had a major impact by offering exceptional benefits to metal parts that are used in a wide range of industries.

Tags: Products, Cutting Tools, Quality

Why Should You Care About Quality?

August 27, 2018 | by Kimball Midwest

Have you ever bought a cheap product or worked with a company that was offering inexpensive services only to have it come back to bite you?

Tags: Products, Quality, Commitment

Mixing and Matching Your Hydraulic Components?

August 20, 2018 | by Kimball Midwest

We’re back with another installment of our Ask the Expert series. This time, we’re addressing the importance of using the same manufacturer for all components of a hydraulic hose assembly.

Tags: Hydraulic Systems, Hydraulic Hose, Liability

Previous All posts Next